Vape

Weapon Terms – Glossary of 16 Common Concepts

  • 2020-05-20
  • Author: daniel west
  • Updated: 2026-10-29
  • 7 min read
  • Very Popular(1338)
Weapon Terms – Glossary of 16 Common Concepts

Here we explain 16 common terms about vaping and e-liquid, from coils and mouthpieces to nicotine strength and PG/VG. Click on a term to go to the explanation.

Coil / atomizer

A coil is the heating element in an e-cigarette. It heats the e-liquid absorbed by the wicking material, often cotton, and forms an aerosol commonly called vapor. The word is also used for a replaceable coil head containing both a heating element and a wick. Atomizer is a common term, but the function is based on heating liquid rather than burning tobacco.

The heating element may consist of wire or mesh, a net or perforated metal surface. The coil’s construction, power, airflow and liquid affect flavor and vapor production. Read more about mesh coils and see our guide to e-cigarette parts and maintenance.

RDA – Rebuildable Dripping Atomizer

An RDA is an atomizer in which the user installs the coil and wick themselves. E-liquid is dripped onto the wick instead of being fed from a surrounding tank. The wick runs through the coil or rests against the heating surface, depending on the construction.

There is often a small liquid reservoir at the bottom, known as a juice well, with room for liquid and wick ends. It is part of the liquid-feeding system. We do not recommend an RDA for beginners, as installation requires knowledge of resistance, batteries and compatibility.

RTA – Rebuildable Tank Atomizer

An RTA is a tank with a build deck on which the user installs their own coil and wick. The tank’s reservoir feeds the wick with e-liquid, unlike the dripping feed in an RDA.

The coil’s resistance must be suitable for the tank, battery device and battery. We do not recommend an RTA for beginners; installing your own coil requires being able to check the build and follow the equipment’s limitations.

510 connection and 510/810 mouthpieces

A 510 connection is a threaded connection between, for example, a tank and a battery device. It provides both mechanical attachment and electrical contact.

510 and 810 are also used as designations for different mouthpiece fittings. Such a mouthpiece, also called a drip tip, is usually pressed into place and held by O-rings. The mouthpiece fitting and the tank’s electrical connection are therefore different things. When replacing one, both the fitting and the construction must match the tank; not all e-cigarettes use these connections.

Nicshot – nicotine-containing base liquid

A nicshot is a nicotine-containing base liquid, usually with PG and VG, intended to be mixed with other e-liquid. It is added, for example, to a nicotine-free shortfill with room for mixing. The liquids are mixed by closing the bottle and shaking it according to the product instructions.

The EU Tobacco Products Directive, TPD, forms the basis for the rules governing nicotine-containing refill containers. In Sweden, such a container sold to consumers may contain a maximum of 10 ml. The bottle’s volume alone, however, does not indicate the nicotine content of a liquid, for example after mixing it yourself.

MTL – mouth to lung

MTL stands for mouth to lung. The aerosol is first drawn into the mouth and then down into the lungs. The more restricted airflow may resemble the draw of a cigarette.

MTL equipment is often used at lower power than open DTL equipment. Many MTL coils are intended for more free-flowing e-liquid. Which mixture is suitable depends on the construction of the coil and pod.

DTL – direct to lung

DTL stands for direct to lung. The aerosol is inhaled directly into the lungs without the first step of drawing it into the mouth as with MTL. The airflow is usually more open.

DTL equipment often operates at higher power and can produce more vapor than MTL equipment. The size of the device alone does not determine which inhalation method it is intended for. The same flavor may be available in liquids for both MTL and DTL; the mixture needs to suit the coil.

Hardware

Hardware refers to the physical parts of an e-cigarette, such as the battery device or mod, tank or pod, coil and mouthpiece. Mod is a term for the battery device that supplies power to the coil. E-liquid is a separate consumable product.

E-juice / e-liquid

E-juice, e-liquid and vape juice are names for the liquid heated in an e-cigarette. It usually contains PG, VG and flavorings and is available both with and without nicotine. Juice and sauce are also used as slang for e-liquid. The liquid is not intended to be drunk.

Ohm and sub-ohm

Ohm, with the symbol Ω, is the unit of electrical resistance. On a coil, the ohm value indicates the resistance of the heating element. A coil with a resistance below 1 Ω is called sub-ohm.

At the same current, higher resistance requires higher voltage. The ohm value alone does not determine flavor or vapor production; power, heating surface and airflow also play a role. Low resistance does not automatically mean DTL, and high resistance is not in itself a measure of how suitable the equipment is for a beginner.

Nicotine strength

Nicotine strength is the amount of nicotine per milliliter of liquid and is stated in mg/ml. Examples of how strengths are written include 3 mg/ml, 6 mg/ml, 12 mg/ml, 18 mg/ml and 20 mg/ml.

Nicotine-containing e-liquid sold to consumers in Sweden may contain a maximum of 20 mg/ml. This is a concentration, not a limit of 20 mg for the entire bottle. For nicotine-containing refill containers, there is also a maximum of 10 ml per container. Nicotine is a highly addictive substance.

Priming a coil

Priming a coil means allowing the wicking material to become thoroughly saturated with e-liquid before activating the coil for the first time. This reduces the risk of dry heating, which can damage the wick and produce a burnt taste.

How the liquid is supplied depends on the coil’s construction. Follow the instructions for the specific coil and do not activate it with a dry wick. Read our tips for avoiding burnt coils.

Vaper’s tongue

Vaper’s tongue is a colloquial expression for when the flavor of e-liquid seems weaker or different, even though the liquid has not been remixed. It is not a medical diagnosis. The change may be caused by the liquid or equipment, but also by the sense of smell and taste.

We review possible causes and when it may be appropriate to seek medical care in our article about vaper’s tongue and altered taste.

ADV – All Day Vape

ADV stands for All Day Vape and is used as slang for an e-liquid or flavor that someone frequently returns to.

VG – vegetable glycerin

VG stands for vegetable glycerin, also known as glycerol. It is a viscous liquid with a sweet taste that is used as a base ingredient in e-liquid.

Vegetable glycerin can be produced through the hydrolysis of fats and oils. Glycerol is also used in baked goods, other foods and toothpaste, among other things. Such use does not mean that the substance is risk-free to inhale.

A higher VG content usually makes e-liquid more viscous and can change the throat sensation. The mixture must suit the coil so that the wick receives enough liquid. Stop using it if vaping irritates your throat.

PG – propylene glycol

PG stands for propylene glycol. It is a more free-flowing base ingredient than VG and is used as a solvent and carrier for flavorings in e-liquid.

A higher PG content can produce a more noticeable throat sensation, sometimes called throat hit. The throat sensation is also affected by nicotine, flavorings and how the equipment is used. Propylene glycol is also used in, for example, food and personal-care products.

Quick Facts

Reading Time
7 min
Popularity
Very Popular
Category
Vape
Published
2020-05-20