
A mesh coil has a mesh-shaped or perforated heating element. A traditional wire coil has metal wire wound into a spiral. Cotton or another wicking material carries liquid to the heating surface, where heating produces aerosol.
How is mesh constructed?
The mesh may consist of metal wires or a perforated thin metal strip. The shape provides a different contact surface against the cotton than a spiral. Material, mass, dimensions, and power affect heating.

Kanthal and stainless steel are used in mesh. Combinations such as Kanthal A1 and Ni80 are also available. Ready-made coils require the correct coil series and connection; separate strips need to fit the dimensions and mounts of the rebuildable atomizer.
Aspire's older Cleito Pro has had mesh as an option. Cleito Pro and Cleito 120 Pro are different models with different coils.
Original Profile RDA
Wotofo developed the original Profile RDA with Mr.JustRight1. It supports intended mesh strips and wire coils. In an RDA, liquid is supplied directly to the wicking material instead of from a conventional closed tank.

| Mesh variant for the original Profile RDA | Specification |
|---|---|
| Material | Perforated Kanthal A1 |
| Resistance | 0.18 ohm |
| Dimensions | 16 × 6.8 mm |
| Power range | 40–60 W |
The manufacturer's standard package lists a mesh strip, Clapton coil, and shaping tool. A Clapton coil has wire wound around a core. The shaping tool gives the strip an even arc for the clamps and contact with the cotton.
The original Profile RDA has adjustable side airflow. With compatible squonk equipment, liquid can be fed from below from a bottle in the device.
What affects function and wear?
The element's material, mass, and power affect heating time. Contact with the cotton, liquid supply, and airflow affect heat transfer and aerosol formation. Deposits and wear are also affected by the composition of the liquid and usage.
When handling, the charging cable should be disconnected, the device switched off, and the parts cool. The wick should be thoroughly saturated before activation. Stop if there is a dry or burnt taste; burnt cotton cannot be restored by refilling. In the event of abnormal heat, damage, swelling, or liquid in the electronics, charging should also be stopped.
Quick Facts
- Reading Time
- 2 min
- Popularity
- Very Popular
- Category
- Coils, pods & tanks
- Published
- 2019-01-11
Related Products
Products mentioned in this article


