
A new pod may feel different due to liquid wicking, airflow, power and the condition of the parts. The cotton should be thoroughly saturated before the first activation; it should not be run dry during a break-in period.
Saturation and liquid wicking
Cotton or another liquid-absorbing material transports e-liquid to the coil’s heating surface. When liquid vaporizes, the wicking needs to replace it.
For the Aspire Flexus Pro, the manual specifies waiting five minutes after filling. For a new coil in the Innokin Go-Z, it specifies moistening the accessible wick, filling and waiting at least five minutes.
Composition, temperature and wicking openings affect the transport of the liquid. During frequent activations, liquid may be consumed faster than it reaches the heating surface. Sealed, prefilled pods should be kept closed.
Heating and changes in the coil
The coil heats up during activation and then cools down. Power, airflow and liquid wicking affect its function.
Mesh is a mesh-shaped or perforated heating element. The shape of the heating surface and its contact with the wick affect heat distribution. With use, deposits and wear can change its function.
Why the draw may change
Airflow controls, the fit of the pod and liquid in the airflow path affect draw resistance. The Flexus Pro has adjustable airflow.
As the aerosol cools, gaseous components can condense and droplets can be deposited in the airflow path. Excess liquid and leaks can also result in liquid being present there.
Accessible surfaces should be wiped with a dry soft cloth on equipment that is switched off, cool and disconnected. Do not rinse or open the electronics, and do not force an ill-fitting pod into place. The function of the airflow path is explained further in the article about how airflow affects vaping.
Changed taste and taste perception
Liquid formula, wicking, power, airflow and deposits can change the taste.
Taste is also a subjective perception. How strong it feels is not a test of the pod’s condition.
VG and PG can affect the experience
VG, vegetable glycerin, is more viscous than PG, propylene glycol. A higher proportion of VG usually makes the mixture thicker. Temperature and other ingredients also affect viscosity and transport through the wick.
Different mixtures can therefore affect wicking even in the same pod model. The liquid needs to suit the design’s openings and wick; pod size, resistance or number of days of use provide no general compatibility rule. More about composition, taste, aerosol and wicking can be found in the article about VG and PG ratios in e-liquid.
When does the change need to be addressed?
Stop if there is a dry or burnt taste, leakage, damage or malfunction. Do not wait for the problems to go away through continued use.
- Dry or burnt taste: stop the activation. Burnt cotton cannot be restored with more liquid or cleaning; the intended replaceable part needs to be replaced.
- Leakage or liquid around the pod: this may be due to filling, wicking, seals or liquid from aerosol. Wipe only the intended accessible surfaces on equipment that is switched off and cool, without a charging cable connected.
- Weak or uneven aerosol: this may be due to the connection, power or battery function. Do not try to solve it with longer draws or increased power.
- Damage or other obvious malfunctions: in the event of unusual heat, swelling, damage, unintended activation or suspected liquid in the electronics, stop both use and charging. Do not test-charge or test-activate it to see whether the fault disappears.
The Flexus Pro has both a pod with a replaceable AF coil and a pod with a fixed coil. When the coil is used up, the AF coil is replaced in the first design and the pod component in the second. A cracked pod is not repaired simply by replacing the coil. The replacement part should fit correctly.
Ingredient residues and deposits can affect function over longer use, but age or colour alone provides no common replacement threshold. How design and wear are connected is explained in the article about how a pod wears over time.
Quick Facts
- Reading Time
- 4 min
- Popularity
- Popular
- Category
- Coils, pods & tanks
- Published
- 2026-06-23
Related Products
Products mentioned in this article





