Coils, pods & tanks

How a Pod Wears Over Time and What Affects Its Lifespan

  • 2026-06-03
  • Author: dennis danielsson
  • Updated: 2026-10-17
  • 5 min read
  • Very Popular(1075)
How a Pod Wears Over Time and What Affects Its Lifespan

A pod’s liquid, coil and container can be consumed or damaged in different ways. The design determines whether the coil is replaced separately or the entire pod is replaced. Recipe, liquid feed, power, use and storage affect the lifespan.

What is a pod?

A pod is a liquid container that connects to a compatible battery device. The design includes a container, mouthpiece, wick, heating element and connection. The wick conveys liquid, which is heated into an aerosol; what is often called vapour is not solely water vapour.

What is the difference between prefilled and refillable pods?

Prefilled pods are supplied with the manufacturer’s liquid. Sealed pods should not be opened, modified or refilled. Refillable pods are filled through the designated opening with a liquid suitable for the feed system and materials.

Aspire Flexus Pro is available with a replaceable AF coil and with a fixed coil. A tank can also have a fixed coil: Innokin GoMax is replaced as a complete tank section when the coil is worn out. Tanks and pods for e-cigarettes therefore have different replaceable parts.

Which parts wear out or are affected?

  • Coil: deposits on the heating surface can affect flavour, aerosol and feeding.
  • Wick: conveys liquid through capillary action. Feeding that is too slow makes it dry; burnt cotton is permanently damaged. A new coil should be thoroughly saturated before activation.
  • Seals and containers: damage or faults in the seal can cause leakage. Cracked or leaky parts need to be replaced.
  • Mouthpiece: can collect condensation and deposited aerosol droplets. This needs to be distinguished from liquid leaking from the container.
  • Contacts: dirt, liquid or damage can disrupt the connection. Wipe only accessible surfaces with a dry soft cloth on equipment that is switched off, cool and disconnected. Do not file, scrape or bend pins, and do not open or rinse the electronics.

What affects the lifespan?

Liquid recipe, use, heat load and storage affect both feeding and the condition of the parts.

Frequency of use

More activations mean more heating cycles and greater liquid consumption. Design and feeding affect wear, so no common number of days or refills applies to all pods.

E-liquid content

Ingredients and residues can form deposits. Sucralose is an example of a sweetener that can contribute; a sweet taste does not identify the substance. Viscosity needs to suit the feed openings and wick.

Some recipes can damage the polycarbonate tank of the Go-Z even if the VG/PG ratio is correct. Both the material and the recipe therefore need to be suitable.

Nicotine strength and liquid type

mg/ml indicates concentration, nicotine salt indicates the form of nicotine, and VG/PG indicates the base mixture. None of these details alone indicates a rate of wear. A prefilled pod is used with its intended compatible device.

Long and frequent activations

The length and number of activations affect heat and consumption. If feeding does not have time to replace the liquid, the wick may become dry.

Storage

Store pods and bottles dry in their intended closed packaging, protected from sunlight and strong heat. Switch off the device when it is not in use. The Aspire Flexus Pro manual advises against overheated and excessively humid environments. Keep out of the sight and reach of children and pets.

Which symptoms need to be addressed?

  • Weak or changed flavour: may be caused by the liquid, feeding or deposits.
  • Dry or burnt taste: stop the activation. Replace burnt cotton; more liquid, cleaning or higher power will not restore it.
  • Less aerosol: also check battery function, power and connection on equipment that is switched off.
  • Leakage: stop using it. Filling, seals, assembly, pressure or damage may contribute. Condensation may occur at the same time; the amount or taste of the liquid does not reliably distinguish the causes.
  • Uneven activation: requires troubleshooting. Self-activation requires stopping both use and charging.
  • Sound: gurgling may come from liquid in the airflow, while light crackling is a different sound.
  • Abnormal heat: stop use and charging.

In the event of substantial or recurring liquid accumulation, damage, swelling or suspected liquid in the electronics, the problem must not be investigated through continued activation or charging.

Which part is replaced and when?

  • Sealed prefilled pod: replace the pod section when the liquid or fixed coil is used up.
  • Flexus Pro with a fixed coil: replace the pod when the coil is used up or burnt.
  • Flexus Pro with an AF coil: replace the coil separately. A cracked pod or damaged seal needs to be replaced or handled as a separate part.

Gurgling, weak flavour or time in use alone do not determine which part should be replaced. Fit the intended parts without force, fill through the correct opening and wipe away accessible condensation. Replace burnt or damaged parts instead of trying to restore them through cooling or heating.

For e-liquid containing nicotine:

Contains nicotine, which is a highly addictive substance. Age limit: 18 years.

Nicotine warning

Quick Facts

Reading Time
5 min
Popularity
Very Popular
Category
Coils, pods & tanks
Published
2026-06-03

Related Products

Products mentioned in this article