E-liquid & nicotine

VG/PG Ratios – We Clear Things Up

  • 2022-06-01
  • Author: daniel west
  • Updated: 2026-10-27
  • 3 min read
  • Very Popular(1843)
VG/PG Ratios – We Clear Things Up

VG/PG indicates the proportions of vegetable glycerin and propylene glycol in the e-liquid base. 70VG/30PG means 70 percent VG and 30 percent PG. More VG makes comparable mixtures more viscous; more PG makes them thinner.

What are PG and VG?

PG, propylene glycol, is a clear, odorless liquid used as a carrier and solvent. Chemically, it is an alcohol but a different substance from the ethanol in beverages. PG is also found as the food additive E1520 and in some medicines.

VG is glycerol from plant-based raw materials. Glycerol is clear, odorless, viscous, sweet and can feel sticky. It is used, among other things, as E422, in medicines and toothpaste. Glycerol can also be produced from other raw materials; vegetable indicates the origin.

How do flavor, throat sensation and liquid flow change?

The base carries flavorings and possibly nicotine. PG is used as a solvent for flavorings, and VG has its own sweetness. Flavorings are not needed for the base to form an aerosol when heated.

A higher PG proportion can provide a more pronounced throat sensation. The concentration and form of the nicotine, as well as the design of the device, also affect the experience. Nicotine strength is stated separately in mg/ml; the amount in the liquid should be distinguished from the amount absorbed by the body.

More viscous liquid may be drawn up more slowly through the coil’s cotton. An overly thick liquid can therefore result in insufficient wicking. Higher power consumes the liquid more quickly and can worsen the problem.

Which mixture suits the coil?

Liquid openings and wicking material need to supply liquid at the rate it is consumed. For the Vaporesso COSS, the manufacturer specifies PG/VG 50:50 or a higher PG proportion. The requirements apply to the specific model; MTL, sub-ohm or adjustable power alone is not enough to determine the mixture.

Volts indicate voltage and watts indicate power. Keep the power within the coil’s range. Read about wattage settings. Stop if there is a burnt taste; the guide on burnt taste and coils describes what to do.

What happens when two ratios are mixed?

The result is calculated from the volume and proportion of each liquid. 50 ml of shortfill at 70VG/30PG and 10 ml of nic shot at 50VG/50PG give the following:

LiquidVGPG
50 ml, 70/3035 ml15 ml
10 ml, 50/505 ml5 ml
Total 60 ml40 ml20 ml

40 ÷ 60 gives 66.67 percent VG, and 20 ÷ 60 gives 33.33 percent PG: rounded, 67VG/33PG. If the additive is flavorless, the flavor concentration also decreases at the same time.

The nicotine content is calculated as the total amount of nicotine in mg divided by the final volume in ml. The example specifies no nicotine strengths and therefore produces no numerical nicotine result. 50/50 on a shot describes the base.

Illustration comparing VG and PG with a bottle and bullet-pointed properties.

Are the substances safe to inhale because they are used in food?

No. Inhalation after heating is a different exposure than eating a substance. The aerosol is not just water vapor and may contain harmful substances. Smoking bans in smoke-free environments also apply to e-cigarettes even when the aerosol is barely visible.

Quick Facts

Reading Time
3 min
Popularity
Very Popular
Category
E-liquid & nicotine
Published
2022-06-01

Related Products

Products mentioned in this article