
Stop using it if the e-cigarette becomes unusually hot. If there is strong or increasing heat in the battery compartment, swelling, leakage or self-activation, it must neither be used nor charged.
What should you do immediately?
Turn it off and disconnect the charger if this can be done safely. Do not try to recreate the fault by test use or test charging. Contact the seller for service or a complaint. In case of smoke or fire: leave the area, avoid the smoke and call 112. Do not open or carry a smoking device.
Why does the tank become hot?
The coil heats e-liquid, and the heat can spread to the tank or pod. Long or frequent activations can build up heat. Pauses give the heat time to dissipate and the cotton time to absorb liquid.
Excessive power can consume liquid faster than the wick can supply new liquid. Stay within the coil's power range. Innokin's 0.35-ohm Ajax coil is specified at 30–55 W, with 30 W as the starting point. Hard draws can push liquid toward the airflow channel and mouthpiece.
Air passing through the coil carries away heat. Keep the air openings clear; a more open airflow does not change the set power in watt mode.
How does the battery affect this?
Capacity in mAh and permitted discharge current are different specifications. A cell with a higher mAh rating is not automatically intended for higher power. A replaceable battery needs to match the device's size and electrical requirements.
Do not change battery type in an attempt to solve excessive heat, and do not open a device with a built-in cell. Do not use cells with damaged insulating wraps. In a device with multiple batteries, do not mix old and new cells, different brands or different charge levels.
Charge with compatible equipment under supervision on a flat surface with no combustible material nearby. Avoid direct sunlight and hot cars.
What do liquid feed and moisture mean?
VG is more viscous than PG. A liquid that is too thick for the coil's openings may be supplied too slowly, causing the cotton to become dry and burn. Battery heat and leakage need to be assessed separately from this feeding issue.
Wipe spills on the outside with a dry cloth or paper and keep buttons, connections and the charging port dry. Do not rinse the battery compartment. If you suspect liquid inside the electronics, stop using and charging the device and have the seller or service assess it.
When do the parts need to be replaced?
A worn or damaged coil is replaced separately; with a fixed coil, replace the pod. Burnt cotton cannot be restored by washing or refilling. Damaged tank glass and damaged seals should be replaced with suitable parts. A damaged, swollen or abnormally hot battery must be taken out of use.
In case of recurring unexplained heat, contact the seller without first trying all troubleshooting advice. Describe the model and when the heat occurred, during use or charging. For a device purchased from us: support@cigge.se.
Also read about leaking tanks, burnt taste and frequently asked questions about e-cigarettes.
Quick Facts
- Reading Time
- 3 min
- Popularity
- Very Popular
- Category
- Troubleshooting & maintenance
- Published
- 2023-02-10
Related Products
Products mentioned in this article


