Troubleshooting & maintenance

Guide: How to Refill an E-Cigarette?

  • 2023-04-14
  • Author: daniel west
  • Updated: 2026-10-27
  • 5 min read
  • Very Popular(1596)
Guide: How to Refill an E-Cigarette?

Fill a refillable tank or pod through its designated fill port. Do not exceed the maximum level and keep the e-liquid away from the airflow channel. Close the container after filling and let the cotton in a new coil absorb liquid before use.

The tank's mouthpiece, top cap, glass tube, coil and base shown disassembled.

How Is an E-Cigarette Constructed?

The battery stores energy, and the battery unit, often called a mod, supplies power to the coil. The tank or pod contains the e-liquid. The coil is the heating component that vaporizes the liquid; an absorbent material, often cotton, transports liquid to the heating element.

Which Tanks and Pods Can Be Refilled?

A refillable tank or pod is filled through a dedicated fill port. A prefilled, sealed pod should not be opened for refilling, but replaced when it is used up.

Pods are therefore not always prefilled. On some refillable pods, the coil is replaced separately, while the entire pod is replaced when a fixed coil is worn out. Tanks and pods have different openings and caps; unscrewing the top is not a common step for all systems.

How Much E-Liquid Should You Add?

Fill without exceeding the container's maximum level and leave the amount of air space that the design is intended to have. Overfilling can cause liquid to enter the airflow channel and cause leakage.

When changing e-liquid, the container does not need to be filled to the maximum level. Even a smaller amount must reach the coil's cotton openings and keep the cotton saturated. Do not activate the device with an empty tank or pod. Dry cotton can burn when heated, and a damaged coil needs to be replaced.

What Is the Difference Between Topfill, Sidefill and Bottomfill?

The names describe where the fill port is located: topfill at the top, sidefill on the side and bottomfill on the underside. Open the fill port and fill there, not in the tank's central air tube or in the airflow openings.

Topfill – Filling From the Top

The fill port is located under a cap at the top of the tank or pod. The cap may be screwed on or have another opening mechanism. The Vaporesso Target 80 with GTX PODTANK 26 is filled from the top: unscrew the top cap, fill through the fill hole and screw the cap back on.

Sidefill – Filling From the Side

The fill port is located on the side and is often covered by a resealable silicone flap. Open the flap, fill through the port and press the flap back into place so that it seals tightly. The OXVA XLIM V2 with a V2 pod has this type of side filling. XLIM TopFill is another pod variant with the fill port at the top.

Bottomfill – Filling From the Bottom

The fill port is located on the underside. On some tanks, the tank base is removed; on others, the pod is lifted out of the device to access a fill port with a plug. The VOOPOO Doric 60 with the original PnP pod is filled from the bottom. Lift out the pod, open the silicone plug on the underside and fill through the port. Close the plug tightly and put the pod back. This method applies to the original PnP pod, not the Doric 60 Pro with PnP X.

Opening the bottom for filling does not mean that the entire container can be rinsed. Cleaning is a separate step: removable, washable tank parts can be cleaned with water. The coil should not be washed with the tank parts, and electronics must be kept dry. Let the cleaned parts dry completely before reassembly.

In What Order Do You Fill With E-Liquid?

Open the fill port, fill through the correct opening and close the container before waiting for a new coil to become saturated. Only remove the parts needed to access the fill port.

  1. Open the top cap, side flap or bottom port according to the design described above.
  2. Insert the bottle tip into the fill port. Keep the liquid away from the airflow channel.
  3. Fill without exceeding the maximum level or filling into the cap and seals.
  4. Close the fill port and reassemble the parts so that the container seals tightly. Wipe away any spills on the outside and keep contacts, battery and electronics dry.
  5. With a new coil or pod: let the cotton absorb the liquid before activating the device.

The airflow should be handled according to the tank's design. For the Innokin GoMax, the manufacturer states that the airflow openings should be closed during filling and opened again afterward. Adjustable airflow or airflow at the bottom does not make this a requirement for every topfill tank.

How Long Should the Coil Sit After Filling?

The cotton should be fully saturated before heating. For the Vaporesso Target 80 with GTX PODTANK 26, the manual specifies five minutes after filling so that the e-liquid has time to soak into the coil. The top cap should be in place while waiting.

Waiting is necessary for a new coil whose cotton is not yet saturated. Filling a coil that is already saturated is a different step.

Do You Need Help With Filling?

You can contact our support team at support@cigge.se. State the name of the device and the tank or pod so that support can respond for the correct model.

These guides complement the filling steps:

Quick Facts

Reading Time
5 min
Popularity
Very Popular
Category
Troubleshooting & maintenance
Published
2023-04-14

Related Products

Products mentioned in this article