Troubleshooting & maintenance

Are you having problems with your e-cigarette? Here are some tips!

  • 2019-05-16
  • Author: daniel west
  • Updated: 2026-10-19
  • 5 min read
  • Very Popular(1332)
Are you having problems with your e-cigarette? Here are some tips!

Is the tank leaking, is e-liquid coming through the mouthpiece, or does your e-cigarette taste burnt? Here we go through these problems, failure to charge via USB, and poor contact between the tank and battery section.

Turn off the device, disconnect it from the charger, and let it cool before checking the tank and connections. Do not use or charge a device that is damaged, abnormally hot, or has had liquid enter the battery section.

If your e-liquid reservoir is leaking e-liquid

Leaks may be caused by an incorrectly installed coil, a damaged seal, or a tank that has been overfilled. Check that the removable tank parts fit properly and inspect visible seals. A cracked or deformed O-ring needs to be replaced with the correct spare part.

A threaded coil should screw in easily and straight by hand. If it catches, unscrew it and realign it. Stop if it still does not screw in easily; do not force the threads. A push-fit coil should instead sit fully in place in its holder. Replace a damaged coil with a compatible one. If the tank glass or another seal is damaged, that part needs to be replaced.

The position of the airflow control during filling depends on the tank's design. On, for example, the Innokin GoMax, the airflow openings should be closed while filling and opened again afterward. This is not a rule for all tanks. Turn off the device and protect it against accidental activation when it is in your pocket or being transported. Closing the airflow does not replace turning off the device.

If your e-cigarette spits e-juice through the mouthpiece

Stop using the device if liquid e-liquid comes through the mouthpiece. Wipe liquid from the removable mouthpiece with dry paper and check the filling, coil installation, and seals. If the cause is unclear or the problem persists, refrain from using the device and contact our support.

If you have got nicotine-containing e-liquid in your mouth, or are unsure of its contents, contact the Swedish Poisons Information Centre at 010-456 6700 for advice. In an emergency: call 112 and ask for Poisons Information.

The drops may come from condensation or too much liquid in the coil and airflow channel, for example after overfilling. Strong puffs can also draw in more liquid than the coil has time to vaporize. Burnt cotton is another problem and is a reason to replace the coil or pod as described in the section below. Do not try to get rid of the liquid drops by taking more puffs.

My e-cigarette tastes burnt

Stop using the device if it tastes burnt. If the cotton has burned, the coil needs to be replaced. On a pod or tank with a fixed coil, the entire pod or tank must be replaced. Burnt cotton cannot be restored by adding more e-liquid.

A low liquid level, excessive power, and a new coil that has not had time to absorb liquid can cause a burnt taste. A coil also wears out during use. The new coil needs to be thoroughly saturated before first use, and the power should be within its specified range. In our guide on how to avoid burnt coils, we describe maintenance in more detail.

My electronic cigarette does not charge via USB

Failure to charge may be due to the cable, power adapter, USB port, or a fault in the device. Disconnect the charger and check whether the cable or port has visible damage, moisture, or debris. Do not insert a needle, toothpick, or other objects into the port, and do not blow into it. Loose connections, damaged contacts, or debris that is stuck need to be assessed by support or service.

If the device and port are dry and undamaged, you can try an intact cable and a power adapter that meets the device's charging requirements. Do not continue with further charging attempts if the device becomes abnormally hot or still does not charge.

Intended removable battery cells can be charged in a separate battery charger suitable for the cell type. A built-in battery must not be removed for external charging. A separate charger is not a solution for continuing to use a damaged device.

My e-cigarette has no contact with the tank

Poor contact may be due to the coil being incorrectly installed, dirty contact surfaces, or a damaged component. On a turned-off device with a removable tank, you can unscrew the tank and wipe accessible contact surfaces and connection threads with dry, soft material. Do not bend or lift the contact pins, and do not open the battery section.

Check that a replaceable coil is installed correctly and is compatible with the tank. A damaged coil needs to be replaced, but persistent contact problems may also be located in the tank or battery section. Refrain from using the device if the problem persists.

You can get help in our physical stores or contact our support via email. Describe the model, symptom, and any error message on the screen, and we will help you further.

Quick Facts

Reading Time
5 min
Popularity
Very Popular
Category
Troubleshooting & maintenance
Published
2019-05-16