
No. The e-liquid needs to suit the tank’s or pod’s wicking system and materials. VG/PG indicates the liquid base, the nicotine form indicates the nicotine’s chemical form, and mg/ml indicates the concentration.
The wrong combination can cause insufficient wicking or excess liquid at the coil and affect flavour, performance and wear. The same problem can also have other causes, such as seals, assembly or the condition of the coil.
Why don’t all e-juices suit all vapes?
The liquid must be able to travel through the construction’s wicking openings and liquid-absorbing material at the same rate as it is vaporised. Cotton or another absorbent material transports the liquid to the coil’s heating element. The liquid’s viscosity, the materials of the components and the intended power affect how this works.
VG and PG affect compatibility
VG means vegetable glycerin and PG means propylene glycol. VG is more viscous than PG. A higher VG ratio usually makes the mixture thicker, but temperature and other ingredients also affect the liquid. The ratio describes the liquid’s carriers and says nothing about the nicotine form or nicotine strength.
- 50/50: 50 percent VG and 50 percent PG.
- 60/40: 60 percent VG and 40 percent PG.
- 70/30: 70 percent VG and 30 percent PG.
- Max VG: a designation for a high VG ratio, without a single exact percentage shared by all products.
VG is listed first in the examples above. The mixture needs to suit the wicking system even when the device has high power.
Liquid that is too viscous can cause insufficient wicking in a particular design. Liquid that is too thin can contribute to flooding, gurgling or leaking. VG/PG also affects the conditions for aerosol production and flavour reproduction, together with the coil, power and airflow. More about the mixture can be found in the article about VG/PG ratios.
Wicking in pod systems
A refillable pod has a designated opening for bottled e-liquid. Sealed, pre-filled pods, on the other hand, should not be opened or filled with your own e-juice. Pre-filled pod systems are therefore a different design from refillable pods.
Pod systems can have different power ranges, wicking openings and coils. If the wicking cannot replace the liquid that is vaporised quickly enough, the liquid-absorbing material can become dry between activations. The pod format does not automatically mean that the device requires 50/50 or nicotine salt.
MTL describes the inhalation method: the aerosol is drawn into the mouth first and then into the lungs.
Sub-ohm, power and wicking
Sub-ohm means that the coil’s resistance is below 1 ohm. Such coils are also found in pods and MTL designs. The power range depends on the coil variant.
Higher power can vaporise more liquid and therefore places demands on the wicking system. DTL means direct-to-lung inhalation.
Excess liquid can cause gurgling and leaking, but seals and filling can also be the cause. Condensation is a different process: aerosol turns back into liquid in the airflow or mouthpiece.
Can you use nic salt in all vapes?
No, not in all designs. Nicotine salt is formed with an acid; this indicates the nicotine’s form, while VG/PG and mg/ml are stated separately.
1 ml of liquid labelled 5 mg/ml contains 5 mg of nicotine. This is the amount in the liquid; absorption into the body depends on exposure.
Nic salt e-juice can have different ratios, concentrations and flavourings. The form alone does not determine wicking through the coil. The difference between the forms is explained in the article about nic salt and freebase nicotine.
Can you use freebase nicotine in pod systems?
Yes, in pod systems that support this type of liquid.
Freebase and nicotine salt can be available in different concentrations. The nicotine content is stated in mg/ml, separately from the VG/PG ratio.
Can you use shortfill in all vapes?
No. Shortfill is nicotine-free e-liquid in a bottle with space left for an additive. The format does not indicate a common VG/PG ratio and does not make the liquid compatible with all tanks or pods.
A nic shot adds nicotine and liquid. An additive changes the final volume and can alter both the nicotine concentration and the VG/PG ratio. The shortfill’s original ratio therefore does not automatically apply after adding a product with a different composition.
Shortfill e-juice can have a high VG content, but it is the liquid’s actual composition and the design’s wicking system that are relevant, not the bottle size. Sealed, pre-filled pods are not filled with shortfill. The format is described further in our guide to shortfill e-juice.
What happens if you use the wrong e-juice?
Insufficient wicking can cause dry cotton, while flooding can cause excess liquid at the coil. Several faults can produce similar symptoms:
- Dry or burnt taste: stop activating the device. Burnt cotton cannot be restored by refilling; the replaceable coil or the entire designated part with a built-in coil needs to be replaced.
- Shorter lifespan: deposits and insufficient wicking can affect the pod or coil.
- Leaking: can be caused by flooding, filling, assembly or seals.
- Gurgling: can be caused by excess liquid or condensation in the airflow.
- Changed flavour: can be caused by deposits or wicking.
- Uneven aerosol production: can also be caused by the coil, connection or the device’s power and battery function.
Disconnect the charging cable, switch off the device and allow the components to cool before handling the designated removable parts. In the event of abnormal heat, damage, swelling or suspected liquid in the electronics, stop both use and charging.
Which e-juice suits my vape?
Examples of manufacturers’ liquid guidelines:
| Model and design | Manufacturer’s VG/PG information | Support for nicotine form |
|---|---|---|
| Innokin Go-Z, primarily an MTL tank | 50 VG/50 PG and 70 VG/30 PG are stated by the manufacturer. | Nicotine form and strength are stated separately for the liquid. |
| Innokin GoMax, primarily a DTL tank | 70 percent VG or more is stated as suitable. | Nicotine form and strength are stated separately for the liquid. |
| Innokin Trine, refillable pod system | VG/PG is a separate product specification. | Freebase and nicotine salt are explicitly supported by the manufacturer. |
The Go-Z has a polycarbonate tank. Innokin warns that certain liquid recipes can damage the tank material, even when the VG/PG ratio suits the wicking system.
Quick Facts
- Reading Time
- 6 min
- Popularity
- Very Popular
- Category
- E-liquid & nicotine
- Published
- 2026-06-19
Related Products
Products mentioned in this article




