E-liquid & nicotine

How is the nicotine content in e-juice tested?

  • 2026-06-30
  • Author: dennis danielsson
  • Updated: 2026-10-17
  • 6 min read
  • Very Popular(1036)
How is the nicotine content in e-juice tested?

The nicotine content in e-juice is measured through laboratory analysis of a sample from the liquid. The laboratory separates nicotine from other substances and compares the signal with references of known concentration. The result is recalculated for the original liquid and can be compared with the declared nicotine strength.

Liquid chromatography, such as HPLC, and gas chromatography are two analytical techniques that can be used. Sampling, calibration and a validated method affect the reliability of the result.

Why is the nicotine content tested?

The analysis is used to compare the measured nicotine concentration with the product’s labeling and specification. The nicotine content is stated in milligrams per milliliter, mg/ml. A label stating 20 mg/ml declares 20 milligrams of nicotine per milliliter of liquid.

The labeling is not an already measured result for every bottle. The laboratory examines a sample and reports the result with the method’s measurement uncertainty. The control may form part of the assessment before sale.

mg/ml is the concentration in the liquid. The total amount of nicotine also depends on the volume of liquid. The content does not indicate the amount of nicotine in a puff or how much the body absorbs. The nicotine content refers to nicotine, not the entire mass of a nicotine salt including the acid.

When during manufacturing are the tests performed?

Controls can be carried out upon receipt of raw materials, during mixing and after filling. The control points may include:

  • Incoming raw materials: checking the identity and properties of the raw materials before they are used.
  • During mixing: sampling to assess composition and uniformity.
  • Finished e-juice: analysis of the liquid before or in connection with filling.
  • Finished packaged products: spot checks from bottles or pods.

Which steps are used and how often samples are taken is determined by the manufacturer’s control program and sampling plan.

How is the nicotine content measured?

Nicotine can be determined using a validated chromatographic laboratory method. Chromatography separates substances in the sample, and the nicotine signal is compared with references of known concentration. The laboratory takes sample preparation and dilution into account when recalculating the result for the original liquid.

HPLC stands for High Performance Liquid Chromatography. In gas chromatography, GC, separation takes place with a gas as the mobile phase. ISO 20714:2019 describes a gas chromatographic method for nicotine, propylene glycol and glycerol in e-liquid.

A simple rapid test does not automatically provide the same information as a validated quantitative method. The method’s measurement range and ability to distinguish nicotine from other substances must be suitable for the sample.

If a result is stated in mg/g, the liquid’s density is needed for conversion to mg/ml. One gram of liquid is not automatically one milliliter. Even a low measured concentration must be interpreted within the method’s limit of quantification, LOQ: the lowest level that the method can determine with sufficient quality. A result below this limit does not prove exactly zero nicotine.

Why is HPLC used?

A validated HPLC method can separate nicotine from other substances in the liquid and determine the concentration within a controlled measurement range. The laboratory assesses, among other things, the method’s precision, accuracy and how other ingredients affect the separation.

  • Verify the nicotine content: measure the concentration in the analyzed sample.
  • Compare production batches: compare results while taking sampling and measurement uncertainty into account.
  • Assess compliance with the specification: compare the measurement result with a stated limit according to a decision rule.
  • Document quality controls: record the sample, method and result so that the analysis can be followed up.

HPLC is also used in the pharmaceutical, food and chemical industries.

How is a sample taken?

The laboratory takes a sample that should represent the liquid or batch. The homogeneity of the mixture and where and when the sample is taken affect how representative it is.

The sampling and analysis are documented together so that the result can be linked to the correct product or batch.

Can the nicotine content vary between different batches?

Yes. Differences between batch results may be due to actual variation in the product, sampling or analysis. Controls can be used to detect and monitor the variation.

Measurement uncertainty describes the uncertainty in the measurement result. It is not a permitted deviation from the label or a general exception to a statutory maximum limit.

Batches are compared using a clear sampling procedure and a method suitable for the liquids. The applicable tolerance depends on the specification and applicable regulations.

How does mixing affect the result?

If nicotine is not evenly distributed in the liquid, a subsample may have a different composition than the rest of the batch. Homogeneous mixing is therefore important for the sample to be representative.

Nicotine is mixed with propylene glycol, PG, vegetable glycerin, VG, and flavorings. Mixing equipment distributes the ingredients before filling; sampling is used to examine uniformity.

Ingredients and flavorings can also affect the separation in the analysis. The method must therefore be validated for the type of liquid being examined. The article about VG and PG ratios describes these base ingredients.

Are other properties also tested?

Yes. The following properties are examined using separate analyses or measurements:

  • Homogeneity: whether the ingredients are evenly distributed in the liquid being examined.
  • Purity of the ingredients: which contaminants are present within the scope of the selected analysis.
  • Microbiological analyses: examinations of microorganisms using separate methods.
  • Stability over time: how the examined properties change under defined storage conditions.
  • Filling volume: the amount of liquid filled into the packaging.

How is the nicotine content regulated in Sweden?

Liquid containing nicotine for e-cigarettes may not contain more than 20 mg/ml nicotine. The rules are based on the EU Tobacco Products Directive, TPD, and Swedish legislation.

Manufacturers and importers must notify the e-cigarettes and nicotine-containing refill containers concerned to the Public Health Agency of Sweden via EU-CEG no later than six months before their market introduction. The requirement for nicotine-containing refill containers should not be transferred to every nicotine-free shortfill.

Companies are responsible for ensuring that the product requirements are met. Product notification is not a prior check or approval by an authority.

Quick Facts

Reading Time
6 min
Popularity
Very Popular
Category
E-liquid & nicotine
Published
2026-06-30