Vaporesso XROS 5 Vape Kit

Vaporesso XROS 5 is a pod system in the XROS series. The device has adjustable power and airflow, a 0.88‑inch colour screen and both inhalation activation and button activation. XROS 5 uses the XROS pod series and is supplied with two mesh pods.

Vaporesso XROS 5 – features and specifications

• Product type: Pod system (kit)
• Adjustment: Power in steps (with 0.4 Ω pod) and three modes with other pods (PWR/NOR/ECO)
• Airflow: Adjusted via slide switch on the back
• Screen: 0.88‑inch colour screen
• Battery: 1500 mAh
• Charging: USB‑C, up to 3 A at 5 V or 2 A at 9 V
• Pod capacity: 3 ml
• Compatibility: XROS pods 0.4–1.2 Ω
• Activation: Inhalation activation and button
• Product category: Vape starter kit
• Brand: Vaporesso
• Dimensions: 120.8 × 24.5 × 14.5 mm
• Weight: 73.7 g
• Resistance (compatible pods): 0.4 / 0.6 / 0.8 / 1.0 / 1.2 Ω

What is included in the XROS 5 kit?

• One Vaporesso XROS 5 battery unit.
• Two mesh pods: 0.6 and 0.8 ohm, with 3 ml capacity per pod.
• One USB‑C cable.
• User manual and warranty card.
• Compatibility card.

Compatibility and use – Vaporesso XROS 5

• XROS 5 is compatible with the XROS series pods. XROS reserve pods are sold separately. With a 0.4 Ω pod the power can be adjusted in steps.
• With other pods three power modes are used: Power (PWR), Normal (NOR) and Eco (ECO).
• A short click wakes the screen and shows the battery level. The device is activated by inhalation or by holding the button.
• Two clicks within two seconds opens the flavor selection. Choose with a click and hold the button for two seconds to confirm.
• Three clicks within two seconds opens the power or mode selection.
• Four clicks within two seconds opens the settings.
• Five clicks within two seconds turns the device on or off.

Power modes in XROS 5 (PWR, NOR, ECO)

With XROS pods of 0.6–1.2 ohm three power modes are used. With the 0.4‑ohm pod the power is adjusted in watt steps.

• Power (PWR): the higher power level within the device's range. Airflow is adjusted separately with the switch.
• Normal (NOR): the power level between Power and Eco.
• Eco (ECO): lower power setting.

Open the mode selection with three clicks within two seconds, select PWR, NOR or ECO with a click and wait three seconds to save. With the 0.4‑ohm pod watt adjustment is used. The current setting is displayed on the screen.

Vaporesso XROS 5 – e‑liquid suitable for each pod

• 0.4 Ω – suitable with e‑liquid with higher VG, e.g. 70VG/30PG (common for RDL).
• 0.6 Ω – suitable with 50VG/50PG. Can be used with freebase e‑liquid or nicotine salt e‑liquid (MTL/RDL).
• 0.8 Ω – suitable with 50VG/50PG intended for MTL.
• 1.0 Ω – suitable with 50VG/50PG MTL.
• 1.2 Ω – suitable with 50VG/50PG MTL.

Note: Let a new pod sit for 5 minutes after the first fill before use. Follow the instructions.

Care for Vaporesso XROS 5

• Remove the mouthpiece, fill the pod through the fill hole and put the mouthpiece back securely.
• Charge with the supplied USB‑C cable. Use a compatible wall adapter.
• Replace the pod when flavor or vapor production seems changed.

Important about Vaporesso XROS 5

The product does not contain nicotine. The product is used with e‑liquid that may contain nicotine.

When using e‑liquid with nicotine: Nicotine is a highly addictive substance. Age limit 18 years.

Below is the nicotine warning for nicotine‑containing e‑liquid.