Vaporesso LUXE Q3 Kit 3 ml, 1450 mAh

The Vaporesso LUXE Q3 Kit consists of a rechargeable battery unit and refillable LUXE Q pods. This listing is for the 3 ml version with a built-in 1450 mAh battery. It is an MTL pod system: MTL stands for mouth-to-lung and describes a draw in which vapour is first held in the mouth and then inhaled into the lungs.

Draw activation and adjustable airflow

LUXE Q3 activates automatically when inhaling through the mouthpiece. Airflow is adjusted using the slider on the side of the battery unit. The slider changes the amount of air passing through the device and therefore the draw resistance.

Refilling the supplied 3 ml pods

The two supplied pods are filled from the side through an opening beneath a silicone plug. The following steps apply to these 3 ml pods:

1. Remove the pod from the battery unit. Before first use, remove the protective sticker from the pre-installed pod.
2. Open the silicone plug on the side of the pod and add e-liquid through the filling port.
3. Close the silicone plug securely after filling.
4. Wait five minutes after filling a new pod for the first time so that the coil can become saturated before use.
5. Fit the filled pod back into the battery unit.

Pod replacement and contacts

When the pod needs replacing, pull it out of the battery unit and fit a new LUXE Q pod in its place. Keep the contacts between the pod and battery unit clean.

Battery, charging and maximum output

The integrated, rechargeable battery has a capacity of 1450 mAh. Maximum output is 20 W. The charging connection is USB-C, and the device supports charging at up to 2 A.

The battery indicator's five lights show the remaining battery level:

• Five lights: 80–100%.
• Four lights: 60–80%.
• Three lights: 40–60%.
• Two lights: 20–40%.
• One light: 0–20%.

During charging, the lights illuminate in sequence. All five remain steadily lit when the battery is fully charged.

Which LUXE Q pods are compatible?

LUXE Q3 is compatible with Vaporesso LUXE Q pods in both 2 ml and 3 ml versions. The manufacturer lists the following resistances for the two capacities:

• 3 ml: 0.6 ohm, 0.8 ohm and 1.0 ohm.
• 2 ml: 0.6 ohm, 0.8 ohm, 1.0 ohm and 1.2 ohm.

This kit includes two 3 ml Mesh pods: a pre-installed 0.6 ohm pod and an additional 0.8 ohm pod. The other resistances in the list describe compatibility and are not included in the box.

Compatible replacement pods are available as Vaporesso LUXE Q Pod (4-pack), with 3 ml per pod and built-in Mesh coils rated at 0.6, 0.8 or 1.0 ohm.

Dimensions, weight and colour variants

The 3 ml version of LUXE Q3 measures 96.85 × 18.4 × 26 mm and weighs 66.2 g. The model comes in six colours: Aegean Green, Birkin Red, Classic Black, Mocha Brown, Prussian Blue and Rose Pink.

Package contents

• 1 × Vaporesso LUXE Q3 battery unit.
• 1 × Vaporesso LUXE Q Mesh Pod, 3 ml, 0.6 ohm, pre-installed.
• 1 × Vaporesso LUXE Q Mesh Pod, 3 ml, 0.8 ohm.
• User manual.
• Warranty card.
• Reminder card.