Coils, pods & tanks

Information about Wire and Coils for RDA/RTA/RDTA

  • 2019-05-16
  • Author: daniel west
  • Updated: 2026-10-19
  • 5 min read
  • Very Popular(1110)
Information about Wire and Coils for RDA/RTA/RDTA

In a rebuildable atomizer, a coil made of metal wire is installed and the cotton is replaced separately. An RDA has a build deck where e-liquid is added by dripping; models with squonk support can also be fed from a squonk bottle. An RTA has a tank that feeds the cotton with e-liquid, while an RDTA combines a build deck with an e-liquid reservoir beneath it.

Wire material, diameter, length and construction affect the coil's resistance and heating. Here we go through Kanthal A1, N80 and SS316L, the tools and the differences between round wire, Twisted, Clapton, Fused Clapton and Alien.

Kanthal A1, N80 and SS316L

Kanthal A1, often marked KA1, is an alloy of iron, chromium and aluminium. It is used as resistance wire and withstands high temperatures. With the same wire length and cross-section, KA1 has a higher electrical resistance than N80. Temperature resistance, however, is not an indication of how hot a finished coil may be operated.

Metal wire arranged in rings

Nichrome 80, also called N80 or Ni80, is a nickel-chromium alloy with nominally around 80 percent nickel and 20 percent chromium. The alloy makes up the wire itself. Metals, including nickel, may occur in aerosol from e-cigarettes.

SS316L is stainless steel containing, among other elements, chromium, nickel and molybdenum. It can be used in wattage mode and in temperature control, TC, when the device supports a profile for the correct material. KA1 and N80 are used in wattage mode and are not common TC materials.

Heating time depends on both the wire's mass and the power supplied. Material, diameter and processing also affect how the wire springs back and retains its shape during winding.

Tools for coil and cotton replacement

A coil jig is used to shape the spiral around a specific diameter. A round screwdriver shaft can also function as a forming tool. Wire cutters are used to cut the wire, and a suitable screwdriver is needed for the build deck's screws. Cotton replacement also requires suitable cotton and tools for cutting it.

Tool kits can bring together several of the tools, but the contents vary between kits. The tools do not replace checking the coil's fit, resistance and electrical connections. If you need help with your equipment, you can contact us or ask the staff in our physical stores.

Open tool case with pliers, tweezers, scissors and forming tools

Five common coil constructions

The construction names describe how the wires are joined together. Round wire has a simple structure, while wrapped constructions combine core wires with a thinner outer wire.

Round wire

A round-wire coil is a single round wire formed into a spiral. It requires fewer manufacturing steps than constructions with twisted wires or an outer wrap.

Spiral-shaped coil made of round metal wire

Twisted

A Twisted coil can consist of two wires twisted together and then formed into a spiral. Together, the wires create a different geometry than a single round wire.

Coil made of twisted metal wire

Clapton

A Clapton has a core wire with a thinner wire wrapped around it. The outer wrap creates a ridged surface and adds mass to the construction.

Spiral-shaped coil with a tight outer wrap

Fused Clapton

A Fused Clapton has two or more parallel core wires held together by a thinner outer wrap. Three cores are one of several configurations.

Two coils with a tight outer wrap

Alien

An Alien has several core wires and a wave-shaped outer wire. One configuration has three parallel cores. The wavy outer wire can be formed from a Clapton wrap by removing the original core and stretching the wrap before placing it around the new cores.

Coil with a wave-shaped outer wrap

More cores and an outer wrap change the coil's surface area, mass and heating. This affects vaporization together with power and e-liquid supply. The flavour experience also depends on the e-liquid; the construction name does not indicate a specific flavour or aerosol amount. Material, work steps and package quantity affect the price of wire and pre-made coils.

Which coils are suitable for MTL and DL?

MTL means mouth-to-lung and DL means direct-to-lung. For MTL, round wire, Twisted and Clapton are among the options, but more complex constructions can also be used when the dimensions, airflow and e-liquid supply suit the atomizer. A small build area limits which coils will fit.

DL does not mean that any coil will fit. The coil must be able to be secured in the build deck and have clearance from the cap, while the material and resistance must work with the device's operating mode and limits. This applies to RDA, RTA and RDTA, regardless of the draw style.

What wattage should be used in RDA, RTA and RDTA?

It is not possible to determine a wattage level based solely on the name Clapton, Alien or a particular resistance. The power setting must remain within the operating limits of the device and construction. The coil's mass, surface area and e-liquid supply affect how it heats and how the e-liquid vaporizes.

Resistance and connections need to be checked before use, and the coil must not touch the cap or other parts that could cause a short circuit. Do not activate a construction that produces a short-circuit error or has unstable resistance. Stop using it if you experience a burnt taste; higher power is not a solution to insufficient e-liquid supply.

Quick Facts

Reading Time
5 min
Popularity
Very Popular
Category
Coils, pods & tanks
Published
2019-05-16