Oxva VPRIME Pod Vape Kit

OXVA VPRIME Pod Kit is a pod system with built‑in 2600 mAh battery, adjustable power 5–60 W and a 0.96‑inch colour screen. The device can be activated by inhaling or with the fire button. This kit is the 2 ml version and includes two pods with integrated mesh coils: 0.2 and 0.6 ohm.

Features

• Battery: 2600 mAh, built‑in
• Charging: USB‑C, 5 V/2 A; cable included
• Activation: Inhalation or fire button
• Power: 5–60 W, adjusted with power buttons + and −
• Screen: 0.96‑inch colour screen
• Airflow: Adjustable with side dial
• Pods: OXVA VPRIME with integrated mesh coil, 0.2, 0.4 or 0.6 ohm
• Refill: Silicone plug on the top side of the pod; the fill opening is closed with the plug
• Product category: Starter kits for e-cigarettes
• Brand: OXVA

Technical specification

• Pod capacity in kit: 2 ml per pod, TPD version
• Battery: 2600 mAh, built‑in
• Material: Zinc alloy with IML or leather finish, depending on colour
• Dimensions: 23.45 × 37.8 × 105.5 mm
• Power control: Manual adjustment with + and −, 5–60 W

Design and function

The pod attaches magnetically to the device. The silicone plug on the top side of the pod opens when filling and then closes over the fill port. The pod can be filled while it is mounted. Airflow is set with the side dial.

The device uses OXVA VPRIME pods with integrated coil. When the coil is depleted the whole pod is replaced; the coil is not replaced separately in these pods.

Resistance and recommended power

• 0.2 ohm: DTL, direct to lung. Manufacturer's power range is 45–60 W. A 2 ml pod is included and pre‑installed in the device.
• 0.4 ohm: RDL, restricted direct to lung. Manufacturer's power range is 28–35 W. This pod is a separate accessory.
• 0.6 ohm: RDL or airy MTL, mouth to lung. Manufacturer's power range is 20–25 W. A 2 ml pod is included.

Recommended e-liquids

OXVA's VPRIME guide specifies two blends at the recommended power for all three resistances above: 70 % VG/30 % PG for e‑liquid with freebase nicotine and 50 % VG/50 % PG for e‑liquid with nicotine salt.

Shortfill e-liquids are available with higher VG content. For e‑liquids with nicotine salt the recommendation here is 50 % VG/50 % PG. The blends are recommendations. Use the pod within the power range stated above for the resistance. E‑liquid is not included in the kit.

How to use the device

1. Charge the device with the supplied USB‑C cable. The charging input is 5 V/2 A and the cable is connected to a compatible USB power source.
2. Open the silicone plug on the top side of the pod and fill through the fill opening. Close the plug securely. Let a newly filled, new pod sit for 5–8 minutes before first use so that the wick can absorb the e‑liquid.
3. Mount the pod if it is removed. Start the device with five presses of the fire button within two seconds. Adjust power and airflow. Inhale through the mouthpiece or hold down the fire button while inhaling.

Charging time depends on the power source. Replace with a new VPRIME pod when the flavor changes or vapor production decreases due to a depleted coil.

What is included in the package?

• 1 × OXVA VPRIME device, 2600 mAh
• 1 × VPRIME pod, 0.2 ohm, 2 ml, pre‑installed
• 1 × VPRIME pod, 0.6 ohm, 2 ml
• 1 × USB‑C cable
• 1 × User manual

The specifications refer to the 2 ml kit. The manufacturer also offers a separate standard version with 5 ml pods.

The device and the empty pods do not contain nicotine. When used with nicotine‑containing e‑liquid the nicotine warning applies: Nicotine is a highly addictive substance. Age limit 18 years.